Skip to content

Teton County metal roofing

Metal roofing in Jackson, WY: snow country first, wind country second

Every other Wyoming market on this site starts with wind. Jackson starts with snow, and the snow number here is looked up rather than published. Teton County's design criteria send ground snow load to the ASCE Hazard Tool, with a 105 mph basic wind speed, Seismic Design Category D, and a 34 inch frost depth measured to the bottom of footings. The Town of Jackson criteria publish 115 mph instead, with ground snow load varying per 2024 IRC R301.2.3 and 2024 IBC Section 1608. The plains towns publish about 30 psf and leave it there. A roof in Jackson or unincorporated Teton County is a structural project with an architectural finish, which changes who should install it, what it costs, and how the valley looks.

This page treats Jackson on its own terms: the load case, the standing seam vernacular that answers it, and the town-county licensing system. The statewide fundamentals, uplift ratings, the no-license verification, the storm-contract law, live in the Wyoming metal roofing guide and still apply here.

Built for the load, then for the look

Design in the valley runs structure first. A looked-up Teton County snow load is a different engineering problem from a plains reroof: rafters, bearing, and deck get checked before panels get picked, and roof geometry, where snow slides and stacks, is a safety decision. Wind does not go away either; 115 mph in town and 105 mph in the unincorporated county means the uplift details on wind-rated roof systems still govern clip and fastening choices, layered on top of the snow work.

That load case is why architectural standing seam owns Jackson Hole. A smooth concealed-fastener surface sheds snow instead of snagging it, raised seams keep the locks above meltwater through the freeze-thaw season, and clips let long panels move without opening a fastener hole. Snow retention over entries and walkways gets engineered into the same system rather than bolted on afterward. The matte standing seam that defines valley construction is the structural answer wearing good clothes; the system itself is covered on standing seam metal roofing.

Two license counters, and which one is yours

This one changed, and getting it wrong sends you to the wrong counter. The Town of Jackson licenses contractors through a Certificate of Qualification card for the master of record and then the license, and states that its licensing is limited to work inside town limits: it no longer processes licenses for contractors working in unincorporated Teton County, and directs those applicants to Teton County administration. The county's own building code resolution still references a Town of Jackson license, so outside town limits ask Teton County Planning and Building, (307) 732-8200, which license applies at your address. Permits run through the Teton County Building Division's online portal. On the wildland-urban interface step, Jackson Hole Fire/EMS states that re-roofs and interior-only projects do not require a WUI memo, while the town's building pages state the permit is required before any building permit submittal regardless of scope; confirm your project with Fire/EMS at (307) 733-4732. Fire/EMS also states that effective January 1, 2025, wood shakes and shingles are no longer allowable for any project in the county.

Remember what none of that checks: Wyoming still has no statewide roofer license, and the town license tests paperwork, not snow-load engineering. The verification below is what closes the gap, here as everywhere.

Budgeting a resort-market roof

Jackson pricing resists the tidy figure. No valley-specific published cost met this site's sourcing bar, and a market of custom homes and short build seasons would strain any average. The honest frame: take a national manufacturer-published range like Western States Metal Roofing's $10 to $16 per square foot installed for standing seam as a budgeting floor, then expect snow-zone engineering, snow retention, custom detailing, and valley logistics to price a Teton County project above it. A strong bid itemizes those layers; metal roof installation explains what each step of the install is doing.

Talk to a roofer who works the valley

Jackson and Teton County homeowners get a free quote from an independent local roofer experienced with heavy-snow metal systems. The professional pays a referral fee, never you, per how we make money. The plains markets are under service areas.

Your request goes straight to an independent local metal roofing contractor serving Wyoming, usually within about an hour during the day, not a national lead list.

Prefer to talk? Call (307) 298-6829.

What happens after you send it

How fast will someone get back to me?
Your request goes to an independent local metal roofing contractor, usually within about an hour during the day. That contractor then contacts you to look at the roof and price the work on their own schedule.

Questions homeowners ask

What snow load must a Jackson roof carry?
Neither Teton County nor the Town of Jackson publishes a flat number any more, and that is the answer: the load is site specific here. The county design criteria send ground snow load to the ASCE Hazard Tool, and the town criteria say it varies and point to 2024 IRC R301.2.3 and 2024 IBC Section 1608. The plains offices covered on this site publish about 30 psf; a Teton County parcel gets a looked-up value instead, and structural design flows from that number before any panel choice. Pull it for your own parcel, or have the engineer on the job pull it, and get it written into the bid.
Who licenses roofing contractors in Jackson?
Address decides it, and this changed. The Town of Jackson licenses contractors for work inside town limits, through a Certificate of Qualification card for the master of record and then the license itself; the town states it no longer processes licenses for contractors working in unincorporated Teton County and sends those applicants to Teton County administration. The county building code resolution still references a Town of Jackson license, so for an address outside town limits, ask Teton County Planning and Building at (307) 732-8200 which license applies before you sign. Neither program is roofing specific.
Why is standing seam the default roof in Jackson Hole?
Because the load case rewards it. A concealed-fastener standing seam surface sheds snow, keeps its seams above meltwater, and lets panels move through hard freeze-thaw cycles while the clips stay anchored against the published design wind speed, 115 mph inside town limits and 105 mph in the unincorporated county. Snow retention over entries and walkways gets engineered into the same system. The valley’s architectural look grew out of that physics as much as out of taste.
What is a WUI permit and do I need one?
For a reroof, probably not. Jackson Hole Fire/EMS states that re-roofs and interior-only projects do not require a WUI memo, while the Town of Jackson building pages state that applicants must apply for a WUI permit before submitting for a building permit regardless of scope. Those two readings conflict, so confirm your own project with Fire/EMS at (307) 733-4732 rather than taking either at face value. What does reach every roof in the county: Fire/EMS states that effective January 1, 2025, wood shakes and shingles are no longer allowable for any project in Teton County.
What does a metal roof cost in Jackson?
No Jackson-specific published figure met this site’s sourcing bar, and resort-market projects resist averages anyway. Treat national manufacturer-published ranges, like Western States Metal Roofing’s $10 to $16 per square foot installed for standing seam, as a floor for budgeting, then expect the structural engineering, snow retention, custom detailing, and valley logistics of a Teton County roof to price above it.

Updated

Call (307) 298-6829